COMBIFLEX cellar waterproofing system
Description:
The COMBIFLEX waterproofing system is a unique range of cationic high build bitumen coatings with particular working properties, being early rain proof and with high application security.
All products are tested to DIN 18195-2 and applied without priming coat i.e. very economical. In particular the especially light and specially formulated spray formulation permits an extremely smooth workability or the rapid spray application with high productivity per surface area.
Products:
COMBIFLEX-C2
2 component bituminous high build coating - trowel or spray applied
2 component bituminous high build coating - trowel or spray applied
COMBIFLEX-C2
2 component bituminous high build coating - trowel or spray applied
Description:
- 2 component high build bitumen coating.
- Waterproof material to DIN 18195 part 2.
- For mechanical application e.g. with the HighPump-M8.
- Yields its own moisture through chemical reaction (quickly rainproof).
- Can also be used on matt damp substrates.
- Approved waterproofing system against ground moisture up to hydrostatic pressure on masonry work and concrete.
- Can be used without a priming coat.
- Approved radon barrier
Consumption:
Approx. 3.5 - 6.3 litres/m²/demands of the situation.
| Article Number | Packaging | Unit/Europallet |
|---|---|---|
| 205015-003/b | 180 l/drum | 2 |
| 205015-002/b | 28 l | 18 |
| 205015-001/b | 14 l | 24 |
Technical Drawings:
1.2.1 Exterior basement waterproofing with COMBIFLEX-High Build System
1.2.2 Exterior basement waterproofing with COMBIFLEX-High Build System
1.2.3 Waterproofing in socket area with COMBIFLEX-High Build System
1.2.4 Pipe penetration waterproofing with COMBIFLEX-High Build System
1.2.5 Pipe penetration waterproofing with COMBIFLEX-High Build System
1.2.6 Pipe penetration waterproofing with COMBIFLEX-High Build System
1.2.7 Movement joint waterproofing in a continuous bottom slab with COMBIFLEX-High Build System
Technical Data Sheet:
COMBIFLEX-C2
COMBIFLEX-C2/S
2 component sprayable bituminous waterproof coating
2 component sprayable bituminous waterproof coating
COMBIFLEX-C2/S
2 component sprayable bituminous waterproof coating
Description:
- 2 component, polymer-modified, solvent, PCB and PCP free sprayable waterproof bitumen coating.
- Waterproof material to DIN 18195 part 2.
- Yields its own water through chemical reaction (quickly rainproof).
- Can also be used on matt damp substrates.
- Tested waterproof system against ground moisture up to hydrostatic pressure on masonry work and concrete.
- Can be applied without a priming coat.
- Approved radon barrier
Consumption:
Approx. 3.0 - 6.0 litres/m²/demands of the situation.
| Article Number | Packaging | Unit/Europallet |
|---|---|---|
| 205017-003/b | 1000 l/container | |
| 205017-002/b | 180 l/drum | 2 |
| 205017-001/b | 28 l | 18 |
Technical Data Sheet:
COMBIFLEX-C2/S
COMBIFLEX-C2/P
2 component bituminous high build coating, powder B component
2 component bituminous high build coating, powder B component
COMBIFLEX-C2/P
2 component bituminous high build coating, powder B component
Description:
- 2 component, polymer-modified, solvent, PCB and PCP free high build bitumen coating.
- Waterproof material to DIN 18195 part 2.
- Yields its own water through chemical reaction (quickly rainproof).
- Can also be used on matt damp substrates.
- Approved waterproof system against ground moisture up to hydrostatic pressure on masonry and concrete.
- Can be applied without a priming coat.
- With chromate and cement free powder components.
- With the HighPump-M8 up to 80 m² surface area per hour.
- Approved radon barrier
Consumption:
Approx. 4.5 - 7.0 kg/m²/demands of the situation.
| Article Number | Packaging | Unit/Europallet |
|---|---|---|
| 205025-002/a | 25 kg/Combination packaging | 18 |
Brochure:
COMBIFLEX-C2/P
Technical Data Sheet:
COMBIFLEX-C2/P
COMBIFLEX-EL
2 component bituminous high build coating - with lightweight mineral fillers
2 component bituminous high build coating - with lightweight mineral fillers
COMBIFLEX-EL
2 component bituminous high build coating - with lightweight mineral fillers
Description:
- 2 component, polymer-modified, solvent, PCB and PCP free high build bitumen coating.
- Waterproof material to DIN 18195 part 2.
- Yields its own water through chemical reaction (quickly rainproof).
- Can also be used on matt damp substrates as well as for overcoating / repairing existing polymer modified high build bitumen coatings.
- Approved waterproof system against ground moisture up to hydrostatic pressure on masonry work and concrete.
- Can be applied without a priming coat.
- Low consumption per surface area.
- With chromate and cement free powder components.
- Approved radon barrier.
Consumption:
Approx. 3.75 - 5.0 litres/m²/demands of the situation.
| Article Number | Packaging | Unit/Europallet |
|---|---|---|
| 205035-002/b | 22 l/Combination packaging | 18 |
| 205035-003/b | 11 l/Combination packaging | 24 |
Technical Data Sheet:
COMBIFLEX-EL
COMBIDIC-2K
2 component polymer modified high build bitumen coating
2 component polymer modified high build bitumen coating
COMBIDIC-2K
2 component polymer modified high build bitumen coating
Description:
- 2 component polymer modified, solvent, PCB and PCP free, fibre-reinforced, high-build bitumen coating.
- Anionic.
- Waterproofing material to DIN 18195-2.
- Waterproofing of structures in contact with the ground such as e.g. cellar walls, foundations, base slabs or beneath screeds dependent on wet duty conditions.
- Ground moisture and non-standing seepage water in accordance with DIN 18195-4.
- Water not under pressure - moderate wet duty conditions in accordance with DIN 18195-5.
- Intermittemt standing seepage water in accordance with DIN 18195-6.
- Suitable as an adhesive for insulating, drainage and protective boards.
- Suitable as a primer for ASOL-FE.
Consumption:
Construction waterproofing: Dependent on conditions approx. 4 - 5 kg/m². Protective board bonding: approx. 1 kg/m²/mm thickness.
| Article Number | Packaging | Unit/Europallet |
|---|---|---|
| 205012-002/b | 30 kg | 18 |
Technical Data Sheet:
COMBIDIC-2K
INA Schutz- und Drainelement
Protection and drainage element
Protection and drainage element
INA Schutz- und Drainelement
Protection and drainage element
Description:
- CFC free expanded polystyrene board covered with a filter-fleece.
- Drainage element as vertical drainage and as technically correct protection of waterproofing materials in contact with the ground in accordance with DIN 18195, part 10.
- Length 1250 mm x width 625 mm x thickness 40 mm.
| Article Number | Packaging |
|---|---|
| 205022-001/c | 7.8 m² (=10 boards) |
Technical Drawings:
1.10.5 Pipe penetration waterproofing with AQUAFIN-2K or AQUAFIN-2K/M (Load: ground moisture and non rising seepage water )
1.10.6 Pipe penetration waterproofing with AQUAFIN-2K/M (Load case: seepage water)
1.10.7 Expansion joint sealing by continuous bottom plate with AQUAFIN-2K/M (Load case: soil moisture and non-seepage water)
1.15.1 Example of waterproofing in wall-floor connection with AQUAFIN-RS300
1.2.1 Exterior basement waterproofing with COMBIFLEX-High Build System
1.2.2 Exterior basement waterproofing with COMBIFLEX-High Build System
1.2.3 Waterproofing in socket area with COMBIFLEX-High Build System
1.2.4 Pipe penetration waterproofing with COMBIFLEX-High Build System
1.2.5 Pipe penetration waterproofing with COMBIFLEX-High Build System
1.2.6 Pipe penetration waterproofing with COMBIFLEX-High Build System
1.2.7 Movement joint waterproofing in a continuous bottom slab with COMBIFLEX-High Build System
Technical Data Sheet:
INA Schutz- und Drainelement (protection and drainage board)
ASO-Verstärkungseinlage
Reinforcing fabric
Reinforcing fabric
ASO-Verstärkungseinlage
Reinforcing fabric
Description:
- Glassfibre fabric with high tear resistance.
- As an inlay in polymer modified high build bitumen coatings when applied according to DIN 18195.
Consumption:
Approx. 1.01 m²/m²
| Article Number | Packaging | Width | Length | Unit/Europallet |
|---|---|---|---|---|
| 205023-001/c | 1 m | 25 m | 96 | |
| 205023-002/c | 1 m | 100 m | 24 | |
| 205023-003/c | roll x 15/box | 25 cm | 25 m | 360 |
Technical Data Sheet:
ASO-Verstärkungseinlage (Reinforcing fabric)
ASO-Systemvlies-02
Protective fleece and slip membrane
Protective fleece and slip membrane
ASO-Systemvlies-02
Protective fleece and slip membrane
Description:
- PP-fleece with high resistance to tearing.
- Resistant against earth bourne pollutants.
- The special structure of the fabric guarantees a secure bond to the waterproof coating.
- Assists through drying of polymer modified high build bitumen coatings.
- As a protective measure against sliding or slipping of drainage or insulation boards.
Consumption:
1.01 m²/m²
| Article Number | Width | Length | Unit/Europallet |
|---|---|---|---|
| 205021-002/c | 1 m | 25 m | 78 |
| 205021-001/c | 1 m | 100 m | 18 |
Technical Drawings:
1.15.1 Example of waterproofing in wall-floor connection with AQUAFIN-RS300
1.2.2 Exterior basement waterproofing with COMBIFLEX-High Build System
1.2.3 Waterproofing in socket area with COMBIFLEX-High Build System
1.2.4 Pipe penetration waterproofing with COMBIFLEX-High Build System
1.2.5 Pipe penetration waterproofing with COMBIFLEX-High Build System
1.2.6 Pipe penetration waterproofing with COMBIFLEX-High Build System
1.2.7 Movement joint waterproofing in a continuous bottom slab with COMBIFLEX-High Build System
Technical Data Sheet:
ASO-Systemvlies-02
Go to Product...
Consumption calculator
Quickly and easily calculate your consumption of our products.
To the calculator